Ferromanganese FeMn78
Ferromanganese FeMn78 is an alloy whose main components are manganese and iron. The addition of manganese increases the hardness of steel, its anti-corrosion properties and resistance to tearing.
FeMn78 – Mn >75%; Si – 2.2%; P-0.2%; S-0.02%; Fe-15%
Capacity: 100 tn /month.
Ferro Silicomanganese FeSiMn17
Ferrosilicon manganese is an alloy of iron, silicon and manganese used in the metallurgical industry for alloying and efficient deoxidation of steels. The alloy of iron MnC17 is produced according to the technology of GOST 4756-91 and contains at least 65% manganese, 15-20% silicon and sulfur.
FeSiMn17
Mn 65-71%, Si- 15-17%, P- 0.5%, S- 0.02%, C- 2.5%.
Mn – 45%, Si- 15%, P- 0.4%, S- 0.02%, C- 2.5%.
Capacity: 300 tn/month.
Ferronickel FeNi17Cr, FeNi35Cr
An alloy of iron and nickel, which is obtained mainly by reducing the smelting of oxidized Nickel ores and used for alloying steel and alloys.
FeNi17Cr Ni- 17-20%; Cr- 9.5%; Cu- 0.7%; W- 0.5%; C-1.5%; S- 0.15%; P- 0.05%
FeNi35Cr Ni- 32-37%; Cr- 9.5%; Cu- 0.7%; W- 0.5%; C-1.5%; S- 0.15%; P- 0.05%
Capacity: 100 tn/month.
Ferrotitanium FeTi70 St
Alloying alloy of iron and titanium obtained by reduction or remelting. Ferrotitanium is used in the manufacture of steel for alloying, degassing and deoxidation. Usually steel containing ferrotitanium has high mechanical properties.
FeTi70St – Ti- 68-75%; Al- 5%; Si-0,25%; C- 0,15%; P- 0,02%; S- 0,02%; V- 2,5%; Sn- 0,5%; O-2,00%
Capacity: 40 tn/month.
Ferrosilicon FeSi25
The main components are iron and silicon. The process of ferrosilicon production is based on the reduction of silica. Ferrosilicate additives are used as deacidifiers for electrical, spring, corrosion and heat resistant steels.
FeSi25
Si- 23-29%; C- 0.8%; S- 0.02%; P- 0.06%; Al- 1%.
Capacity: 200 tn/ month.
Alluminium AV87
Secondary aluminum, which is made from scrap and secondary raw materials. It is a necessary raw material for the needs of ferrous and non-ferrous metallurgy.
Al87 Si < 5%; Cu < 3,8%; Pb<0,3%; Mg<3%; Zn<3,3%; Sn< 0,2%.
Capacity: 200 tn/month.
Scrap Cast Iron
Mn- 2%; S- 0.07%; P- 0.15%
Capacity: 500tn/month.
Slag Steelmaking
Fe2O3-55%; SiO2-12%; Mg- 8.5%; Mn-4.6%;
Capacity: 1000tn/month.
Note: chemical composition might be different by request